Archives de catégorie : Logiciels Libres

The single most important thing you should know about Ubuntu…

… if you’re new around or if you’re introducing someone else to Ubuntu for the first time, I think a critical read is the following link:

Painfully obvious ? Rightfully so.

Many new (and old) « converts » ask questions about how to compile applications, manually install .deb packages… those should be the last one needs to do when installing applications in Ubuntu (or any Linux for that matter), at least when you want to keep the system as close as possible to regular, supported security/feature updates and upgrades as possible.

I am still a bit surprised when I get a comment like « I’ve been trying to compile/install XYZ for a few days/hours » and there almost always is a solution using packages part of the regular repositories! For those special cases when there isn’t I have a million suggestions, but compiling is far from the top of my list.

Another friendly advice, also consider asking on the Launchpad « Answers » system or showing your new converts how to do that, many times you may find things in Ubuntu are done in a slightly different way – not always obvious, most of the time easier. Don’t take my word for it 😉 Asking where or how to get help is OK too.

Last but not least, http://www.ubuntu.com/support provides links to official docs, free community support and even commercial options. Chances are there is a Local Community Team in your area, know it, promote it, join it, use it!

There’s only one better thing than discovering Ubuntu, and that is knowing where its community is and how to tackle into it and even participate in it. I’ve found when new users are empowered to do this, they don’t have to depend on me at all for future support! Well, unless they want 24/7 immediate phone support, that is 😉

 

Become a router port forwarding guru in 5 minutes

If you’ve ever helped someone over the phone change any router configuration, you know it’s a bit of a challenge to guide anyone through the mazes of menus and options each different router has just to enable port forwarding for any given application.

Fear not, you can now become your local neighborhood router guru, just bookmarkhttp://www.portforward.com and have it handy when someone requests you mighty knowledge. If you feel like letting anyone else in to this carefully guarded secret, do so at your own risk 🙂

Thanks for the tip, David!

 

New Vostro Systems for Emerging Economies: Ubuntu in More Countries

The Direct2Dell blog is a great way to find out about new Ubuntu development and products at Dell from a reliable source one can actually quote publically 🙂

From my seat on the support side of things, I used to worry about such exposure – how can you give tech support to so many new Ubuntu users ? Granted, this is only but a small fraction of Dell’s business, but it is growing fast in many ways (and countries, as seen below). Many vendors understand the need to build their own support infrastructure and knowledge, not much new in that area. But being able to do so in your local language, in different markets, taking advantage of all the freedom LInux and in general Ubuntu offers is a huge new bonus. You get to decide if/when you need professional services (from Canonical or else) and you set the speed for that.

This ranges from pre-installing and supporting Ubuntu on certified servers to selling and supporting a boxed edition that includes 60 days support for $19.99 at Best Buy.

In Dell’s case, having part of their Linux wiki dedicated to Ubuntu and even forums and mailing lists means such initiatives have all the chances to success as Ubuntu’s strong community can complement all efforts from Dell and give traction to them. I also see how Ubuntu’s philosophy slowly infiltrates such offerings 🙂

From the blog post (emphasis mine):

Today we’re rolling out two new laptops and desktops that are designed to meet the specific needs of small businesses, government and educational facilities operating on a limited budget in the worlds top emerging markets. Take a look at either Steve Felice’s post or Kara Krautter’s post on the Small Business blog for a bit more context on that front.

Vostro A840 NotebookNote: Click on any of the images in these post to see larger versions of them. You can also see these photos and more by viewing this photo set at the main Dell Flickr page.

One thing of interest to a lot of our readers is that we will offer Ubuntu Linux as an option on all four of these machines worldwide. Regular readers of Direct2Dell know that we already support Ubuntu on select systems several countries.

These new Vostro systems will be introduced in more than 20 countries over the coming months—including Asia, Africa, Europe and Latin America. They will be available primarily through authorized channel partners worldwide and also directly from Dell. Pricing for the products will vary by configuration, region and country. Additional Vostro products designed for emerging markets and high-growth economies will be introduced in the coming months.Vostro A860 Notebook

 

BionX Montreal blues – la suite

La semaine passée après 3 semaines d’attente pour un remplacement en garantie du moteur-roue arrière BionX, j’ai envoyé ce courriel (aussi publié sur Facebook) à Bionx , ABC Sport et Quilicot:

Last year I bought my BionX (including bike) at Quilicot (http://bicyclesquilicot.com) in Montreal QC, thinking this was a reputable place with people that knew their stuff. They even have ads on the radio. I now think it was a big mistake. I wouldn’t do this again.

Even living in Montreal and properly locking my system (removing battery and computer, accessories, etc.), I was robbed last year. I guess you expect to be robbed once in a while even in this somewhat safe city. That is unrelated to my bad experience.

But when replacing my stolen bike my BionX dealer (Quilicot) messed up several times on its delivery, just as with the first bike (thank God I had insurance): missing lights, wrong accessories, missing information, wrong tires and spokes causing many flats and broken spokes, out-of-stock parts and so on. You would think when you describe your intended usage of a bike and you inform your dealer you know next-to-nothing about bikes, they would honestly and properly inform you about options and needed accessories. Well, I have learned more about biking because of their mistakes that I could ever hope from any training I guess. Taking a ride home with a flat tire and BionX bike costs CDN$40 BTW.

I recently moved and my new BionX dealer, ABC Cycles (http://www.abccycles.com/) suggested I use only stainless steel spokes to prevent them from breaking, also confiding BionX’ s originals were cheap to save some money (!). After another $80, my rear wheel motor computer started failing (coincidence ?).

ABC Cycles delivered it without testing it because « I forgot to leave the key for the battery and the computer ». How the hell am I supposed to know what their testing procedures are ? Why would they have testing equipment, being a dealer ?

They wouldn’t believe the problem I had until they physically took a ride. After « checking all connections and reconnecting » I got the bike back and had the very same trouble one day later. They finally diagnosed it to be a problem that required in-warranty replacement of the rear axle/computer.

Guess what, BionX may decide to replace it completely including spokes, so it will come with the same cheap spokes originally shipped, so bye-bye $80. Every time I went through such checks I had to leave the bike for 2-3 days at a time or more (« until our BionX guy comes back from vacation »), while spending money on buses and cabs to get to work – not to mention the added time of commuting.

Well, it’s been almost 3 weeks now that I got back to my original dealer for the replacement and they can do nothing about BionX being out of stock, apparently this is entirely normal and Quilicot suggested I get my original wheel back to them and ride on my (quite expensive at this point) human-powered bike – which I did.

Guess what, this morning when taking my bike to work once again Quilicot fucked up the rear wheel replacement. My rear wheel was so low on air I barely made it to work!

I hate having the money to try this expensive crap, particularly when I know the technology is ready but customer service to properly deliver it is not.

Depuis cet envoi (mercredi passé), j’ai pu parler à Yannick chez Quilicot. Il m’a promis un prêt, et jeudi après-midi on m’appelait pour m’informer que le vélo était prêt! Excitation. Seulement un accusé réception bien pauvre de la part de BionX et une tentative d’appel d’ABC Sports (merci l’afficheur).

Vendredi vraiment tout s’est accumulé et je n’ai pas pu aller le chercher. Donc samedi matin je me présente à la boutique, plus détendu, un peu gêné de ma lettre de bêtises déclarant l’échec du service à la clientèle pour ce produit (et ses détaillants).

Silence total. Je me sens observé, on ne me parle pas trop. Yannick est là, je m’attends à ce qu’il fasse au moins semblant d’être désolé de tous ces problèmes qu’on aurait pu èviter. Il travaille sur un vélo, c’est à peine s’il m’adresse la parole, il parle à ses employés. Un d’eux me prends enfin en charge (Sébastien), il reprends le vélo, des ajustements commencent. Je croyais qu’il était prêt ?!

Je ne dis rien, j’attends avec ma fille de 2 ans qui a plus d’attention que moi. On ne trouve pas le « work-order ». Quand je le reçois, je ne remarque aucune mention du prêt de BionX neuf, ni des discussions qu’on a eu depuis mercredi, rien. Pas de mention non plus du remontage de la roue ordinaire (j’ai le vélo sans Bionx depuis 1 semaine) ni des pièces qu’on ma remises, rien. Bref, le bordel. Je fais la remarque à Yannick, il se limite à me dire « inquiète-toi pas, moi je vais m’en rappeler ». Ça sonne comme des menaces au secondaire! Ok, I get it, tout le monde a lu mon message, j’imagine, pas besoin d’être gentils.

Je demande à Sébastien de venir avec moi à l’auto car traîner un BionX et sa fille de 2 ans en même temps, pas évident. Rendus dehors il me demande pour la clé de la batterie – oups! Ils ont oublié de me la donner! Ah ben, quelle surprise.

Puis en chemin il me passe le commentaire qui sort comme quand on a envie d’aller aux toilettes et qu’on s’est retenu assez longtemps: « Coudonc, le blog c’était-tu nécessaire ??? ». Wow! On a eu une bonne discussion et malgré qu’au départ il était un peu sur la défensive, je crois qu’il était vraiment désolé de tout ce bordel. Il n’en revenait pas quand j’ai mentionné toutes les erreurs et omissions vraiment de débutant (à mon humble avis) que leur boutique et leur staff renommé avaient faites, même le jour de la livraison de mon BionX en prêt! Par exemple: où est le réflecteur rouge arrière ? Euhhhhh…. chais pas! le néoprène pour retenir le filage BionX ? Hein ? Oups.

On se comprends, je suis un grand fan de BionX. ça me fait pas juste chier quand mon vélo est en panne mais surtout quand le staff fait même pas semblant d’être désolé. Au moins Sébastien chez Quilicot a pris la peine de se renseigner vraiment sur ce qui se passait et à la fin il semble que tout se résume à l’énorme succès de BionX depuis 2 ans, surtout.

Prix du gaz qui monte -> Plein de nouveaux cyclistes -> Magasins de bicyclette débordés -> BionX qui se vendent en quantité alarmante (semble-t-il) -> Rupture de stocks -> Staff qui travaille > 60h/semaine -> augmentation d’histoires d’horreur comme la mienne.

Personnellement je trouve cette équation un peu simpliste.

Malgré tous ces problèmes, je continue de penser qu’un suivi téléphonique serré et une communication honnête et claire gardent un client satisfait « no matter what » – ou presque.

Bottom line, aujourd’hui je roule sur un BionX prêté par Quilicot (merci Yannick et son équipe), j’ai hâte de voir pour la suite (le remplacement de ma roue, les rayons en stainless, etc.).

Et j’attends toujours des nouvelles de Bionx et d’ABC.

 

Dear Lazy Web: are Sony Memory Stick (MS) and Memory Stick Pro (MSP) Ubuntu-friendly ?

I’ve just filed Bug #237369,JMicron card reader (152d:2339) in HP Pavilion 2035la doesn’t support Memory Stick Pro (MSP) for a friend in the -co channel that has an HP Pavilion DV 2035la (or DV 2000 series as they call it). I was a bit surprised that Sony Memory Stick (MS) and Memory Stick Pro (MSP) cards would not be supported yet and I am seeing contradictory reports on this.

Apparently MS* support is card-reader specific, and this one’s USB id (152d:2339) doesn’t seem very common.

If anyone knows what the status of MS* support is in Linux (and Ubuntu specifically), I’ll gladly stop writing keyword intensive posts like this one 🙂